QuadroPPM (Bausatz) (PPM 컨버터)

[*New: Add-on Type] Brushless Gimbal Control Board (Black), Assembled - 3 Axis, by AlexMos

 

* 본 제품은 License Fee가 지급된 정품 AlexMos Firmware 탑재 컨트롤보드 제품입니다.

 

[제품 설명]

 

브러쉬리스 모터 직접구동(BLDC) 방식의 짐벌/카메라마운트를 제어하기 위한 Control Board 제품입니다.  포함된 자이로 및 가속도 센서를 통해 PID 제어로 Camera Stabilizing을 수행합니다.  기존 서보 방식의 짐벌/카메라 마운트 대비 빠르고 정확한 보정을 수행하여 고품질의 영상을 얻을 수 있도록 도와줍니다.  * 새롭게 출시된 Add-on 타입으로 메인 Controller와 Expansion Board를 겹쳐 Mounting할 수 있어 부피를 줄여 협소한 공간에도 장착 가능하게 되었습니다.

 

[제품 제원 및 특징]

 

- 크기:  50 x 50mm (메인 Controller), 16 x 16mm (IMU), 24 x 52mm (Expansion Board)

- H/W Ver: v1.0

- S/W(Firmware) Ver: v2.3b5, AlexMos

- 50 x 50mm size with 45 x 45mm mounting hole pattern for M3 screws
- Onboard mini-USB
- Access to serial port, so a Bluetooth can also be hooked for easy tuning.
- L6234 Motor drivers
- Atmega 328P with Alexmos Bootloader preinstalled
- Controller weight: 15 grams
- MPU6050 IMU included

 

[What's New]

 

- New option: skip gyro calibraion at startup. With this option checked, board starts working immediately after power ON.

- New menu command and GUI button for manual gyro calibration RC Map, RC Source moved to profiles. It allows to change RC control setting by switching profiles.

- RC YAW axis control may be  inverted now by specifying Min.angle > Max.angle, like for other axis (but this setting not used for limiting, just for inverting).

- I2C errors monitoring: LED will blink when I2C error detected

- New option: gyro high sensivity. It doubles sensivity of the gyro, that  equals to multiplying gains in the PID controller by 2.  It may be usefull for big DSLR cameras.

- The "Firmware Upgrade" tab in the GUI is working now and allows to upload a new firmware.

 

[매뉴얼, GUI 등 제조사 다운로드 Link]